Iron fence maintenance method

Generally speaking, the manufacturer has considered the characteristics of the outdoor environment during the production process of iron fences. In the selection of materials and coatings, they strive to achieve anti-rust, wear resistance, corrosion resistance, and anti-exposure, so users only need to purchase Look for well-known manufacturers when using iron fences. Don’t be greedy to buy some iron facilities of substandard quality. In order to extend the life of outdoor wrought iron facilities, the following points should also be achieved:

1. Avoid bumps.
This is the first thing to notice about wrought iron products. Wrought iron products should be handled with care during the handling; the place where the wrought iron products are placed should be the place where hard objects are not often touched; the ground where the wrought iron products are placed should also be kept flat. When installing the guardrail, it should be ensured that it is firm. If it shakes unstable, it will deform the iron guardrail over time and affect the service life of the iron guardrail.

2. To remove dust regularly.
The outdoor dust is flying, accumulating day by day, and a layer of floating dust will fall on the iron art facilities. It will affect the color and luster of the iron art, and then cause the damage of the iron art protective film. Therefore, outdoor wrought iron facilities should be wiped regularly, and soft cotton fabrics are generally better.

3. Pay attention to moisture.
If it is only the general outdoor air humidity, you can rest assured of the rust resistance of the iron fence. If it is foggy, use a dry cotton cloth to wipe the water droplets on the ironwork; if it is rainy, wipe the water droplets dry in time after the rain stops. As acid rain is raging in most areas of our country, the rainwater remaining on the ironwork should be wiped off immediately after the rain.

4. Keep away from acid and alkali
Acid and alkali are the “number one killer” of iron fence. If the iron fence is accidentally stained with acid (such as sulfuric acid, vinegar), alkali (such as methyl alkali, soapy water, soda water), immediately rinse off the dirt with clean water , And then wipe dry with a dry cotton cloth.

5. Eliminate rust
If the wrought iron fence is rusty, do not use sandpaper to sand it on your own terms. If the rust is small and shallow, you can apply cotton yarn dipped in engine oil to the rust. Wait for a while and wipe it with a cloth to remove the rust. If the rust has expanded and become heavier, you should ask the relevant technicians to repair it.

In short, as long as you master the common sense about maintenance and pay attention to protecting the wrought iron fence in your daily life, you can extend its life and make your carefully selected wrought iron products to accompany you for a long time.

Post time: Mar-20-2021